| PNC | Código da peça | Título | Quantidade | Em formação |
i |
|---|
| 1 | 22949922 | SHIELD,FRT BRK(ACDelco #22949922) | 01 |
|
| 1 | 22949923 | SHIELD,FRT BRK(ACDelco #22949923) | 01 |
|
| 2 | 11588711 | PARAFUSO, HFH, M6 X 1 X 16, THD 10, OD 14,2, 8.8 AÇO, GMW3359,(PROTETOR FREIO DIANTEIRO) | 06 |
|
| 3 | 13512895 | HUB,FRT WHL(INCLS 6)(120X5 NON DRIVEN WHL BRG)(ACDelco #FW445)(VEHS BUILT W/O STAINLESS STEEL BEARING SPLASH SHIELD)(FOR 1ST DES SEE 13509913) | 02 |
|
| 3 | 13509913 | HUB,FRT WHL(INCLS 6)(ACDelco #RW20-170)(VEHS BUILT WITH STAINLESS STEEL BEARING SPLASH SHIELD)(FOR 2ND DES SEE 13512895) | 02 |
|
| 4 | 13578082 | ROTOR,FRT BRK(18")(ACDelco #13578082) | 02 |
|
| 4 | 13592358 | ROTOR,FRT BRK (COATED)(ACDelco #177-1216) | 02 |
|
| 5 | 11570339 | PARAFUSO, CS PLANO, M6X1X20, DIÂM EXT 12,3, ROSCA 14,2, GMW25 (8,8), GMW3044, T-30, HDR-P(DISCO FREIO DIANTEIRO)(8.908) | 02 |
|
| 6 | 11588811 | BOLT,FRT & RR WHL HUB(PART OF 3)(M14X1.5X58,24THD)(WHEEL STUD) | 05 |
|
| 7 | 23504875 | KNUCKLE,STRG(CODE BAD4) | 01 |
|
| 7 | 23504876 | KNUCKLE,STRG(CODE BAD5) | 01 |
|
| 7 | 23504875 | KNUCKLE,STRG(CODE AAZV) | 01 |
|
| 7 | 23504876 | KNUCKLE,STRG(CODE AAZW) | 01 |
|
| 8 | 11546368 | NUT,S/KNU (AT FRT LWR CONT ARM)(M14X2,29.9)(5.506) | 02 |
|
| 9 | 11609282 | NUT,STRG LNKG OTR TIE ROD(FASTENER IS SINGLE USE, REPL IF LOOSENED OR REMOVED)(M12X1.75X16)(26OD)(16.714) | 02 |
|
| 10 | 22949916 | SHIELD,FRT BRK BRG | 02 |
|
| 11 | 11570789 | BOLT,FRT WHL HUB(M12X1.75X61,27THD)(4.665) | 06 |
|
| 11 | 11570789 | BOLT,FRT WHL HUB(M12X1.75X61,27THD)(4.665) | 02 |
|
| 12 | 11588712 | PARAFUSO, CABEÇA SEXTAVADA C/ FLANGE, M6 X 1 X 20, ROSCA 17,5, DIÂMETRO EXTERNO 14,2, 8.8, GMW3359(SENSOR VELOCIDADE RODA DIANTEIRA) | 02 |
|
| 13 | 22995143 | SENSOR,FRT WHL SPD(ACDelco #22995143) | 02 |
|
| 13 | 22995145 | SENSOR,FRT WHL SPD(BI-DIRECTIONAL)(ACDelco #22995145) | 02 |
|
| 14 | 11546367 | NUT,HEX FLANGE,PREVAILING TORQUE,M12X1.75,18MM SOCKET,GMW3359B(FRT UPR CONT ARM BALL STUD) | 02 |
|
| 15 | 11611085 | BOLT,FRT BRK CLPR BRKT(M14X2X45,28THD,30 OD)(10.5, W/ADHESIVE) | 04 |
|
| 16 | | PINÇA,FREIO DIANTEIRO(VIDE ILUSTRAÇÃO DETALHADA NO GRUPO 04 "PINÇA-FREIO/DIANTEIRA") | | |
